Concrete Cutting in Alhambra CA - Straight, clean cuts with the dust kept down
Need a path through your slab for a pipe or drain? We cut it straight and right where the layout says.
- Licensed and fully insured.
- Free on-site estimates.
- We respond within 1 business day.
When do you need concrete cut, and what goes into the job?
Concrete cutting in Alhambra means sawing straight lines through a slab, cutting into a concrete wall or drilling round holes, so a pipe, drain, conduit or trench can get through, or a damaged section can come out cleanly.
Most calls start with another job. A plumber needs to reach a line under the garage floor, you want a drain where water keeps sitting, or a cracked piece of driveway has to come out without breaking the rest. The price moves with how many feet we cut, how thick the concrete is, whether there's steel in it, whether you need round holes, and whether you want the pieces broken out and hauled off. The schedule turns on whether we need drawings or a scan before cutting and whether the bigger project needs a permit. Your written estimate lists each of those parts for your job.
How do you know your slab or wall needs cutting?
A cracked, sunken driveway panel
One section has cracked through or dropped below the rest while the concrete around it still looks sound, which usually means the dirt under that piece settled or washed out. A straight saw cut lets that one piece come out without cracking its neighbors, and if you wait, the edges keep chipping and the lip you trip on gets taller.
Pipe work under the slab
Your plumber found a leak or needs a new line, and the only way in is through the concrete. A cut line keeps the opening square and the patch neat, and a leak left running can wash out the subgrade, the packed dirt the slab sits on.
Water pooling by the house
Water sits along the patio or against the house after it rains because the slab has nowhere to send it. A trench cut for a drain line is often the fix, and the longer it sits, the more it soaks the ground under the slab and the house.
How we handle concrete cutting, from layout to cleanup
Before a blade touches anything, I ask whether the cut is in a slab or a wall and whether any steel could be in the way, like rebar, the steel bars set inside a slab to hold it together, because those answers pick the saw and tell us whether we need drawings or a scan first. Then we snap the lines on the concrete, set up the saw and cut wet, with water fed to the blade so the dust stays down. If the job calls for it, we break out the panels and haul them away, and our quote says plainly whether that part is included. We finish by cleaning up the cut so you're left with a clean edge to pour against.
Most cuts lead to new concrete going back in. If cutting out a damaged run turns into a bigger replacement, we take that on as concrete driveway building or concrete patio construction, with a base that's dug out and packed and control joints, the shallow grooves we saw so the slab cracks along a line we chose. I'd put the money into that base before a fancy surface, because you can't see it on day one and it's what keeps the new slab from sinking like the old one.
Flat sawing for slabs
A walk-behind saw makes long straight cuts in driveways, patios, garage floors and other flat slabs. It's the right pick when you need a trench for a line or a broken panel cut out.
Wall sawing for vertical concrete
A saw mounted on a track runs up or across a concrete wall or a steep surface, which suits a new opening in a wall. Where the space is too tight for the track, a hand saw takes over.
Core drilling for round holes
A core drill bores a clean round hole so a pipe, drain or conduit can pass through a slab or wall. Those holes are usually priced differently from a straight saw cut, so they get their own line on the estimate.
Get a written scope for your concrete cutting job
Send the form and we'll reply within one business day to set up a free visit. I come out, measure and look at the cut, and you get a written estimate with no obligation.
(626) 597-0288- Based in
- Alhambra, CA 91801
- Hours
- Mon–Fri: 8 AM–10 PM, Sat–Sun: 7 AM–9 PM
What happens after you call us about concrete cutting?
Here's how a cutting job runs from your first call to the walk-through at the end, and who does what along the way.
Call or send the form
Call (626) 597-0288 or send the form, and we'll set a time for me to come see the spot. If you have building drawings for the slab or wall, set them aside for the visit.
I measure and write it up
I come out, measure the cut and ask what the concrete carries and what's going through it. You get a written estimate that lists each part of the job, so you know what you're paying for before anything gets cut.
We handle any permit
If a permit's involved, we take care of it and let you know where things stand with the city. Alhambra also checks a report listing everyone working on the job, which takes about two weeks and has to clear before a building permit is finalized, so we plan the cutting date around it.
We cut, clean up, walk it
Our crew does the cutting, and I'm on site checking the lines as it goes. When we finish, I walk the job with you before we call it done.
Why Alhambra homeowners call Optimum Alhambra Concrete for concrete cutting
I measure every cut myself
I come out myself to walk the job and take the measurements, so the person who marked the lines is the one answering your questions. Nothing gets lost between the estimate and the saw.
Commercial crew habits since 2023
I started this business in Alhambra in 2023 after years on commercial crews, where every pour got checked against the plans before the truck backed in. On a cut, that means the layout gets checked before the saw starts, because a cut can't be put back.
Licensed and fully insured, every job
We're licensed and fully insured. That matters when a saw is running a few feet from your house and your driveway.
When you're ready, send us the details or call (626) 597-0288, and I'll come out and look at the cut.
Concrete cutting and cleanup on Alhambra jobs
Alhambra's Building Division requires permits for most construction work on private property, and its list names structural work but not concrete cutting, so the list alone doesn't settle whether your cut needs one. If the cut is part of something bigger, like a new opening in a wall, call the Building Division to find out whether your project needs a permit. If it does, we handle the application and keep the paperwork moving.
Wet cutting keeps the dust down but leaves a gray slurry, and the city asks residents to keep construction materials on site and out of the gutter, the street and the storm drains, and to clean up spills without hosing them off. So we contain the slurry at the cut and pick it up instead of washing it away, because putting anything into a storm drain breaks federal law, with steep civil fines for each day of the violation, and the city may add its own citations. We're based in Alhambra and work across the San Gabriel Valley, and we run the same cleanup on jobs in Monterey Park and Rosemead.
Questions about concrete cutting in Alhambra
How much does concrete cutting cost in Alhambra?
Professional concrete saw cutting across the US usually costs about $3 to $10 per linear foot, and that covers the sawing. Reinforced slabs and deeper cuts cost more per foot than easy, open ones, and round holes and hauling are priced on their own. Your written estimate puts a figure on your job.
Does the price of concrete cutting include hauling the concrete away?
Not always, because sawing concrete and removing it are separate jobs, and a cutter may cut the lines and leave the panels where they sit. Breaking, lifting, hauling and dump fees can add more than the sawing itself, so ask any bidder whether removal is in the quote.
Do I need a permit to cut concrete in Alhambra?
The city's permit list doesn't name concrete cutting on its own, but it does name structural work, so a cut that's part of structural work points toward a permit. A call to the Building Division settles it for your project.
Who is licensed to cut concrete in California?
California's state licensing board lists concrete sawing, breaking and coring under its concrete related services classification. Ask anyone bidding your job for their license number and make sure it covers concrete work before you sign.
How do I know if there's steel in my slab before it's cut?
Start with any building drawings you have, because if the cut could cross post-tension cables, which are steel cables pulled tight inside some slabs, or other structural steel, the contractor may need those drawings, a scan of the concrete and an engineer's input first. That check comes before any cutting, so leave room for it in your schedule.
What is the best way to keep concrete cutting dust down?
Cut wet, because California's silica rule names a walk-behind saw with a built-in water system that keeps feeding water to the blade. The state's workplace safety agency says the silica in that dust is known to cause cancer and silicosis, a lung disease with no cure that's often fatal, so ask any crew whether their saw feeds water to the blade.
Concrete work that often follows a cut
Concrete driveway building
When a cut opens up more of the old driveway than it's worth patching, a new pour with a packed base and planned joints can replace the run.
Concrete patio construction
If you're cutting out a cracked patio section or trenching a drain across it, a new patio can go in with the slope running away from the house.
Service areas for concrete cutting near Alhambra
Optimum Alhambra Concrete is based in Alhambra, CA, and does concrete cutting in the 12 cities listed here, including Pasadena and El Monte. We work across the San Gabriel Valley and the cities around it too, so call if yours isn't on the list.
Alhambra, CA
Get your concrete cutting job measured
Have the cut location, a rough length in feet, what you want removed and any building drawings ready, and the first call goes quicker.